A burst pipe, an overflowing dishwasher, or water creeping under the slab after a storm: whatever started it, one call to A Water Damage connects you with an independent, licensed and insured water damage contractor in Logan.
The call is free, and you only pay the contractor if you approve their quote.
Calls are routed to contractors serving zip codes including 84321 84322 84341.

Carpet pad soaks through in minutes, drywall wicks water upward within hours, and the 24 to 48 hour mark is when mold starts to become a serious concern.
A Water Damage is a free phone referral service. We are not the contractor. We connect Logan callers with independent, licensed and insured water damage pros who already work nearby, so the person who shows up knows local homes and can get to you quickly.
Nobody plans for a flood. Most calls start with a split washer hose, a toilet that would not stop running, or a sump pump that quit mid-storm. The person calling is usually ankle-deep in it and has no idea which company to call. Getting them to a qualified local pro quickly is the whole point of this line.
Every pro you are connected with runs an independent business with its own licensing and insurance. Many have IICRC training in water restoration and structural drying. Expect them to arrive with real equipment: extraction units, low-grain refrigerant dehumidifiers, high-velocity air movers, moisture meters, and infrared cameras that find hidden water before it turns into mold.
Whoever you are connected with, confirm license and insurance details for your job directly with the pro before work begins. A good contractor will happily show you both, walk you through the moisture readings, and give you a written estimate before anything gets torn out.

Not every leak announces itself with a puddle. Some of the most expensive water damage jobs start as a faint stain or a slightly soft spot near a baseboard. If you notice any of the signs below, call before it spreads.
Drywall wicks water upward like a sponge. If the bottom of a wall feels soft, shows a tide line, or the paint is bubbling, water is sitting inside the cavity.
That earthy, musty odor usually means moisture is trapped somewhere you cannot see, often under flooring or behind baseboards, and microbial growth may already be starting.
When boards curl up at the sides or laminate starts to tent at the joints, water has soaked into the subfloor and the floor will keep moving until it is properly dried.
A sudden jump on your water bill, or a meter that keeps moving when every fixture is off, often means a slab leak or a hidden supply line break.
Brown rings or a sagging spot overhead usually trace back to a roof leak, an upstairs bathroom, or condensation from an HVAC line. A bowing ceiling can hold a lot of water and should not be poked.
Any visible standing water needs to come out fast. The longer it sits, the deeper it soaks into subfloors, cabinet bases, and drywall.
Every water loss moves through the same three phases: extraction, drying, and rebuild. Pros in the network handle all of them, which keeps one person accountable from the first moisture reading to the last coat of paint.

When water is still on the floor, speed matters more than anything. The contractor starts by stopping the source, cutting power to wet areas if needed, and documenting the damage with photos and moisture readings for your insurance claim. Then the extraction begins, using truck-mounted units for large losses or portable extractors where hoses cannot reach. Weighted extraction tools pull water out of carpet and pad, which can cut drying time by days.
Most home losses come from the same short list: a failed water heater, a cracked supply line, a leaking dishwasher, or a toilet that overflowed. The contractor removes what cannot be saved, dries what can, treats exposed framing with an antimicrobial, and then handles repairs from drywall and texture to trim and flooring.
For businesses, downtime is the real expense. Commercial contractors bring bigger equipment, including desiccant dehumidifiers that handle large volumes of air, and they can plan the work in phases so you can keep part of the building open. Daily moisture logs give your landlord or insurance adjuster a clear paper trail.
Real drying means a controlled environment. Air movers sweep moisture off wet surfaces, dehumidifiers pull it from the air, and the contractor tracks temperature, humidity, and material moisture every day. Equipment stays in place until every wet material matches the readings of dry materials elsewhere in the house.
The best mold remediation is the kind you never need. After extraction, pros treat exposed framing and subfloors with an EPA-registered antimicrobial, cut out porous materials that stayed wet too long, and run HEPA air filtration if spores could travel through the house.
Some losses need extra care. Sewage backups and outside floodwater are Category 3 water, which means full protective gear, removal of affected porous materials, and thorough disinfection. Slab leaks call for leak detection and careful flooring removal. Crawl spaces need vapor barriers checked and dried properly. Tell dispatch what you are seeing so you are matched with a pro equipped for it.
Do not wait for the morning. Independent pros can start extraction tonight.
When water is on the floor, you need a short path to help. Here is what happens after you call.
When you call +1-877-637-9008, you will be asked a few quick questions: what failed, which rooms are wet, and roughly when it started. Those answers help route you to the right local contractor.
You will hear from the contractor directly with an arrival time. In the meantime, they can tell you how to find the main shutoff and which breakers to switch off for safety.
The contractor walks every affected room, takes readings with moisture meters and an infrared camera, sorts out what can be dried versus what has to go, and puts a written quote in your hands before starting.
Once you approve, extraction and drying begin. The contractor monitors daily until materials hit dry standard, then handles repairs. You get the moisture logs and photos for your insurance claim.

When you are dealing with a flood, you want someone who answers, someone who shows up, and someone who explains the bill. That is the standard independent contractors in the network are held to.
You are connected with independent contractors who carry their own licensing and insurance. Ask to see both before work begins, and any good pro will show you on the spot.
Calls are answered around the clock. Since the pros already work in Logan, arrival is often quick, sometimes inside an hour, depending on demand and distance.
Pricing is discussed and written down before work begins. Many pros bill using the same estimating software insurance adjusters use, so the numbers line up and your claim moves faster.
Calls go to contractors who already work neighborhoods in and around Logan. They know the local building styles, the usual trouble spots, and how weather affects homes in the area.
Calling is free. You are under no obligation until you approve a written estimate directly with the contractor, and you can always get a second opinion.
Contractors document the loss with dated photos, moisture maps, and daily drying logs. That paper trail is exactly what adjusters look for, and it protects you if a claim gets questioned later.
People rarely remember the equipment. They remember that the phone got answered, the contractor arrived when promised, and the bill matched what was written down.

Our water heater split on a Sunday night and flooded the garage and half the laundry room. I called the number, and the contractor was at the house in about fifty minutes. He had the water out that night and set up dehumidifiers before he left. Nothing pushy about it.
Dana R.Water heater failure, garage and laundry roomThe thermal camera picture is what got me. The wall looked fine, but it was soaked two feet up. They cut out the bottom section, dried the framing in about four days, and showed me the meter readings every visit.
Marcus T.Supply line leak behind hallway wallA pipe burst in our dental office over a weekend. The crew dried it in phases so we could keep seeing patients in the other rooms, and the documentation they gave us sped up the claim.
Priya S.Commercial office, burst pipeSump pump died during a storm and we had three inches in the basement. The pro pulled up the carpet pad, saved the carpet, and treated the walls so we would not get mold. Fair price, written up before they started.
Jim and Carla W.Basement flood, failed sump pumpDishwasher leaked under the kitchen floor for who knows how long. The laminate was cupping. The contractor found moisture spreading under the cabinets, pulled the toe kicks, and dried it without ripping out the whole kitchen.
Alicia M.Hidden dishwasher leak, kitchenWater from the upstairs bathroom came through the dining room ceiling. The pro drained the bulge safely, dried the joists, then patched and painted. The ceiling looks brand new.
Ben K.Toilet overflow, ceiling damage
Here are straight answers to the questions callers ask most. If yours is not here, call and ask.
Arrival times vary with distance and demand, but local contractors often reach you within an hour or two. You will get an arrival estimate when the contractor calls you back.
The contractor gives you a written quote after inspecting the damage and before any work starts. The referral is free, and you choose whether to move forward.
Common emergency services include water extraction, drying setup, sewage cleanup, tarping, and board-up. Describing the situation clearly helps match you with a pro who has the right equipment.
Most policies cover sudden and accidental water damage, like a burst pipe or a failed water heater, but not gradual leaks or outside flooding unless you carry flood insurance. Contractors provide photos, moisture readings, and drying logs to support your claim. Check your own policy details with your agent.
Most structural drying jobs take three to five days. Dense materials like hardwood, plaster, and concrete can take longer. The contractor checks readings daily and removes equipment only when materials reach dry standard.
Shut off the main water valve if you can, switch off breakers to wet rooms, move valuables and furniture off wet floors, and take photos for your insurance. Do not use a household vacuum on standing water, and stay away from sagging ceilings.
It depends on the source. Clean water from a supply line is Category 1. Water from a dishwasher or washing machine is Category 2 and can make you sick. Sewage and outside floodwater are Category 3 and should only be handled with protective gear. When in doubt, stay out of it.
Not always. If the water was clean and the carpet is extracted and dried quickly, it can often be saved, though the pad usually gets replaced. Carpet soaked by sewage or floodwater should be removed.
Watch for a musty odor, black or green spotting, or new allergy symptoms indoors. The contractor can take moisture readings, and an independent mold assessor can test the air if needed.
No. A Water Damage is a free referral service. We connect you with independent, licensed and insured local contractors who perform the work and bill you directly. Always confirm licensing and insurance with the contractor before work begins.
Contractors in the network work throughout Logan and the surrounding area, including zip codes like 84321 84322 84341. If your address is outside their range, the dispatcher will let you know right away.
A quick call can tell you whether it is a DIY cleanup or a job for extraction equipment.
Independent contractors in the network work throughout Logan, UT and nearby communities. Because they are local, they know the area's housing stock, from older homes with cast iron drains to newer builds with PEX supply lines.
Common service zip codes include 84321 84322 84341, and nearby cities appear in the list below.
